Taramps TS 400x4 FULL RANGE 2 Ohms 4 Channels 400 Watts RMS Class D Car Audio Amplifier Multichannel LED Indicator CROSSOVER Frequency Response 10Hz to 30KHz High Pass and Low Pass
POWER (Power Supply Connector):The connector terminal (+) must be connected to the battery's positive pole with a 4mm² (minimum) wire gauge. The connector terminal (-) must be properly connect to the battery's negative pole with a same wire gauge. The remote terminal must be connected to the Head Unit REMOTE output with a 0.75mm² wire.
INPUT: Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit, using good quality shielded cables to avoid noise interference.
LEVEL: It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Units found in the market
Short-circuit Protection: Shutdown the amplifier when detect a short- circuit or impedance lower than the supported at the output.